RME Babyface Pro FS
 | This page is currently under construction. |
 RME Babyface Pro FS | |
| Manuals | |
|---|---|
The RME Babyface Pro FS is a professional USB audio interface. The device is fully configurable in software, giving you complete control over all audio inputs and outputs.
Specifications
Installation
The RME drivers and TotalMix FX software are installed on all our lab computers as part of the System Image.
Configuration
We recommend using the TotalMix FX software to configure your device, instead of using the controls on the device itself. This way, you can save and load your settings, giving you consistent results for all your experiments.
Ask the TSG for help configuring your device.
⚠️ NEVER turn on 48V (Phantom Power) on any input channel unless you are sure you're using a compatible microphone.
Usage
- Open Totalmix FX from the start menu or the system tray.
- Load your Workspace (File -> Load Workspace)
- Load your Snapshots (File -> Load Snapshot)
- Select your snapshot; Check channel configuration
- When using (a) microphone(s) to record participants; adjust the gain on the input channel to compliment their speaking volume.
⚠️Input gain is set by the Gain knob; NOT by the input fader (slider). The fader only controls how much of the input gets routed to the output (e.g. speakers or headphones).