From TSG Doc
Revision as of 09:11, 6 July 2020 by Wilbert.vanham (talk | contribs) (add link)

Jump to: navigation, search

Corsair Vengeance K70

Most labs have one or more Corsair Vengeance K70 keyboards.

The backlights can be turned on and off with the keys on the top row:

Top row keys
  • Use the round key in the center of the top row marked with a sun to set the keyboard backlight level in 4 steps.
  • Use the round key in the left of the top row marked with a keyboard to switch between backlight on and programmed backlight. In backlight on mode all backlights will be on. In programmed backlight mode only those backlights that you have selected will be on.
  • Press and hold the round key in the left of the top row marked with a keyboard to change which keys are on and which keys are off in programmed mode. Watch this video for a demonstration.

You can for instance program the keys to show which keys are allowed during a certain experiment.

Corsair Keyboard indicating which keys can be pressed during a Simon experiment.

Das Keyboard 4Q

The Das Keyboard allows far more advanced programming of keys. The photo on the right shows how the Das Keyboard can be programmed to react to the key mapping of the experiment. Some participants are instructed to press the E key for a green stimulus and the I key for a blue stimulus. For other participants it is the other way around. These instructions are shown at the start of the experiment. The keyboard backlights are used as a constant reminder of the instructions.

Das Keyboard backlight reacting to the counterbalanced key mapping of a Simon experiment.

If you want to borrow the Das Keyboard 4Q, please contact the Technical Support Group. Please note that the Das Keyboard Q software must be installed on a computer for the keyboard backlights to work.

Detailed information about programming the Das Keyboard 4Q can be found on the manufacturer website. A few examples are given below.

Setting key backlights from Python, the easy way

The easiest way is to use the daskeyboard Python library. Just put the file in the same directory as the experiment and use:

import daskeyboard

daskeyboard.keyColor("g", "blue") # G key becomes blue

Setting key backlights from Python, the hard way

What is done below the hood is that your python code calls a restful deamon that controls the keyboard:

#!/usr/bin/env python3 

url = 'http://localhost:27301'

headers = { "Content-type": "application/json"}

import json
import requests

# prepare signal
signal = {
	'zoneId': 'KEY_Q',
	'color': '#F0F',
	'effect': 'SET_COLOR',
	'pid': 'DK4QPID',
	'name': 'Set Q to purple'

# send signal
result = + '/api/1.0/signals', data=json.dumps(signal), headers=headers)

# checking the response
if result.ok:
	print("Error: " + result.text)