- Dell T3600
- Benq XL2420Z
- Corsair Vengeance K70 Keyboard
- Logitech G500 and G700 mice
- AudioEngine A2 Speakers
- EEG equipment
Analyzer lab (cubicle)
To be able to log in remotely to the analysis computers, you must physically log in to the computer the first time. To do this, book a cubicle that is free. Log in to the computer that is there with your U/E/S number. Then you can log out again. On the computer there is a gray sticker with a number that starts with C, remember this number!
Cubicle 01.307 C022876 22.214.171.124 Cubicle 01.308 C022877 126.96.36.199 Cubicle 01.309 C022878 188.8.131.52 Cubicle 01.310 C022879 184.108.40.206
If you work from home, EduVPN is required. In EduVPN, choose the Institute Access option.
Once the connection is set up, you can open Remote desktop. In Windows, look for the following: Remote Desktop Connection. Enter the IP address which corresponds to the number on the grey sticker. (or the c-number on the grey sticker, followed by .srw.ru.nl e.g.:C022876.srw.ru.nl). When you are asked for your login details, please enter your U/E/S number and your ru password.
- actiCap 32Ch. DCC cap configuration
- actiCap 64Ch. DCC cap configuration
- actiCap 96Ch. DCC cap configuration
- 3D sensor 64Ch. DCC cap configuration
- A fieldtrip lay out matlab file of the customized DCC lay out is available via DCC intranet.
By default the primary display and secondary display are cloned.
Monitor: BenQ XL2420Z Refresh Rate: 120hz Resolution: 1920*1080 (1080p) Color depth: 32bit Display Configuration: Display 2 cloned with Display 1