Difference between revisions of "JoySticks"

Revision as of 11:27, 8 April 2015

Red Joystick

Settings

The Red Joystick can be connected to the computer via USB; the device will emulate a serial port. The following COM port settings should be used:

Baudrate	115200
Parity	None
Data bits	8
Stop bits	1
Flow control	None
CTS Control	Off
DSR Out Control	Off
DSR In Control	Off
RTS Control	Off
Set FIFO Interrupt	Off

Python

 #!/usr/bin/env python
 from rusocsci import joystick, utils
 import logging, time
 
 ## Setup Section
 #logging.getLogger().setLevel(logging.DEBUG) # use this for debug info
 #utils.serialList() # get alist of ports with a joystick or buttonbox connected
 j = joystick.Joystick()
 #j = joystick.Joystick(1) # use this to connect to the second joystick 
 #j = joystick.Joystick(port="COM1") # use this to connect to a joystick on a specific port
 
 ## Experiment Section
 for i in range(15):
 print("x: {}".format(j.getX()))
 time.sleep(1)

Logitech Attack 3 Controller

Logitech Attack 3 Joystick

Installation

The Logitech Attack 3 joystick requires a DirectX 7 DLL file to be installed on your computer. If it hasn't been installed yet, please follow the instructions below.

Windows 7 32bit

Download the dx7vb.dll file.
Extract the zip and copy the .dll file into the following folder: C:\Windows\System32
Open the Windows Command Prompt with Administrator rights.
Register the DLL file by executing the following command:
C:\Windows\System32\regsvr32 dx7vb.dll
When done correctly, you should see the following message:

Windows 7 64bit

Download the dx7vb.dll file.
Extract the zip and copy the .dll file into the following folder: C:\Windows\SysWow64
Open the Windows Command Prompt with Administrator rights.
Register the DLL file by executing the following command:
C:\Windows\SysWow64\regsvr32 dx7vb.dll
When done correctly, you should see the following message:

@@ Line 1: / Line 1: @@
 == Red Joystick ==
 [[File:RedJoystick.jpg|thumb|200px|Red Joystick]]
 === Settings ===
@@ Line 43: / Line 41: @@
 === Python ===
-<nowiki> #!/usr/bin/env python
-#!/usr/bin/env python
-from rusocsci import joystick, utils
-import logging, time
-## Setup Section
-#logging.getLogger().setLevel(logging.DEBUG) # use this for debug info
-#utils.serialList() # get alist of ports with a joystick or buttonbox connected
-j = joystick.Joystick()
-#j = joystick.Joystick(1) # use this to connect to the second joystick
-#j = joystick.Joystick(port="COM1") # use this to connect to a joystick on a specific port
-## Experiment Section
-for i in range(15):
-    print("x: {}".format(j.getX()))
-    time.sleep(1)</nowiki>
-=== Pyhon Script ===
   <nowiki> #!/usr/bin/env python
   from rusocsci import joystick, utils
@@ Line 81: / Line 57: @@
   time.sleep(1)</nowiki>
-= Logitech Attack 3 Controller =
+== Logitech Attack 3 Controller ==
-[[File:logitech_joystick.jpg|200px|Image: 200 pixels]]
+[[File:logitech_joystick.jpg|thumb|200px|Logitech Attack 3 Joystick]]
-== Installation DirectX DLL ==
-'''Copy the dx7vb.dll file'''
-You can find the dll here: [[media:dx7dll.zip]]
-''Windows 7 32bit''
-Within Windows 7 32bit version you need to copy the file dx7vb.dll to the following destination:
- C:\windows\system32
-''Windows 7 64bit''
-Within Windows 7 64bit version you need to copy the file dx7vb.dll to the following destination:
- C:\windows\SysWow64
+=== Installation ===
-'''Register the DLL file by executing the following command within the commandline with administrator rights:'''
+The Logitech Attack 3 joystick requires a DirectX 7 DLL file to be installed on your computer. If it hasn't been installed yet, please follow the instructions below.
-''Windows 7 32bit''
+==== Windows 7 32bit ====
- C:\Windows\System32\regsvr32&nbsp;<span style="font-size: 12px;">dx7vb.dll</span>
-''Windows 7 64bit''
+# Download the [[media:dx7dll.zip | dx7vb.dll file]].
- C:\Windows\Syswow64\regsvr32&nbsp;<span style="font-size: 12px;">dx7vb.dll</span>
+# Extract the zip and copy the .dll file into the following folder: <code>C:\Windows\System32</code>
+# Open the Windows Command Prompt with Administrator rights.
+# Register the DLL file by executing the following command:<br /> <code>C:\Windows\System32\regsvr32 dx7vb.dll</code>
+# When done correctly, you should see the following message:<br /><br />[[file:regsvr32.jpg]]
+<br />
-As a result you will see the following message:
+==== Windows 7 64bit ====
-[[file:regsvr32.jpg]]
+# Download the [[media:dx7dll.zip | dx7vb.dll file]].
+# Extract the zip and copy the .dll file into the following folder: <code>C:\Windows\SysWow64</code>
+# Open the Windows Command Prompt with Administrator rights.
+# Register the DLL file by executing the following command:<br /> <code>C:\Windows\SysWow64\regsvr32 dx7vb.dll</code>
+# When done correctly, you should see the following message:<br /><br />[[file:regsvr32.jpg]]